Answer to Question #58905 in Electric Circuits for Misha Jain

Question #58905

An arc lamp requires a direct current of 10 A at 80 V to function. If it is connected to a 220 V (rms), 50 Hz AC supply, the series inductor needed for it to work is close to

Expert's answer

Answer in progress...

Learn more about our help with Assignments: Electric Circuits

Comments

No comments. Be the first!

Leave a comment

Related Questions

1. A 100cm of wire was used in the heating of a 12v 6ow heater. The length of wire of the same material
2. A 3v battery with internal resistance 0.5 ohms is connected across a parallel combination of 1 ohm a
3. In an experiment, 1/V is plotted against 1/I. The physical significance of the slope of the graph is
4. A 1 ohm resistor is to be made from a 1mm diameter wire of resistivity 2.2 x 10-8 ohm m. the length
5. The difference between the emf of a battery and the lost volts when discharging is called ______ pot
6. In a potentiometer, the wire PQ has the resistance of 5 ohms and the driver cell has an emf of 12v.
7. Calculate the resistance of 180 m of silver wire having a cross section of 0.33mm2 . The resistivi