Answer to Question #189750 in Mechanical Engineering for Yashwanth Kumar

Question #189750

5. Describe in detail about the adjustment and testing of headlights focusing. Give a procedure for current and voltage regulator adjustment in a car. Explain the probable causes for the non-function of electric horn and wipers.


1
Expert's answer
2021-05-10T02:42:11-0400

To adjust your car headlights, first park your car on flat ground facing a bare wall. Unload anything heavy and make sure the pressure in all 4 tires is correct so your car is level. Then, pull up as close to the bare wall as possible and turn on the low-beam headlights.

Procedure for current and voltage regulator adjustment in a car: Connect your voltmeter across the battery posts. Set the Parking brake. Shift the transmission to manual or to automatic. Start the engine and let it idle. Check battery charging voltage.

An inoperative car horn can be caused by a bad horn switch in your steering wheel, a broken “clock spring” under the steering wheel, a bum horn relay, a broken wire, or a corroded ground.


Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Comments

No comments. Be the first!

Leave a comment

Ask Your question

LATEST TUTORIALS
New on Blog
APPROVED BY CLIENTS